(60) Jonghyeog Yoon, Qaisar Abbas, Jiyeong Lee, and Junhwan Lee (2024). "Enhanced Excavation Design Method Based on Characterized Stiffness of Support System", The 2024 World Congress on Advances in Civil, Environmental, & Materials Research (ACEM24), August, Seoul, Korea.

(59) Donggun Nam, Qaisar Abbas, and Junhwan Lee (2024). "In-situ Estimation of K0 based on Cone Penetration Tests", The 2024 World Congress on Advances in Civil, Environmental, & Materials Research (ACEM24), August, Seoul, Korea.

(58) Donggun Nam, Jinoh Kim, Jiyeong Lee, Jongheog Yoon, and Junhwan Lee (2024). “A CPT-based dynamic p-y curve method for seismic analysis and design of pile in sand”, 8th International Conference on Earthquake Geotechnical Engineering (8ICEGE), May, Osaka, Japan.

(57) Jiyeong Lee, Abbas Qaisar, Jongheog Yoon, Donggun Nam, and Junhwan Lee (2023). “Enhancing Load Carrying Performance of Helical Anchor with Changes in Load Application Point”, 17th Asian Regional Conference (ARC) on Soil Mechanics and Geotechnical Engineering, August, Astana, Kazakhstan.

(56) Incheol Kim, Jiyeong Lee, Abbas Qaisar, Jongheog Yoon, Donggun Nam, Jongwhan Eun, and Junhwan Lee (2023). “Regional-specific influence consideration for groundwater level prediction using machine learning-based approach”, 9th International Congress on Environmental Geotechnics, Chania, Greece.

(55) Jiyeong Lee, Garam Kim, Abbas Qaisar, Bokyung Kim, Jongheog Yoon, Gyutae Kim, and Junhwan Lee (2022). “Pullout Load Capacity of Offshore Helical Anchors under Inclined Loading Conditions”, 10th International Conference on Physical Modelling in Geotechnics, Daejeon, Korea

(54) Qaisar Abbas, Garam Kim, Jiyeong Lee, Jongheog Yoon, Bokyung Kim, Gyutae Kim, and Junhwan Lee (2022). “Lateral Load Capacity of Inclined Micropile in Soil-Rock Mixed Layers”, 10th International Conference on Physical Modelling in Geotechnics, Daejeon, Korea

(53) Incheol Kim, Garam Kim, Qaisar Abbas, and Junhwan Lee (2021). "Freezing and Thawing Effect on the Coefficient of Lateral Earth Pressure at rest (K0) with Changes in Degree of Saturation", 20th International Conference on Soil Mechanics and Geotechnical Engineering (20th ICSMGE 2017).

(52) Garam Kim, Incheol Kim, Jiyeong Lee, Abbas Qaisar, and Junhwan Lee (2020). “Normalized p-y analysis method for laterally loaded piles in sand based on CPT results”, 6th International Conference on Geotechnical and Geophysical Site Characterization, Hungary, Budapest

(51) Incheol Kim, Garam Kim, Abbas Qaisar, Jiyeong Lee, Donghun Lee, Donggun Nam, Soonyoung Kwon, and Junhwan Lee (2020). "Load-settlement simulation of footing considering non-linear soil properties and groundwater level", 55th Annual Meeting of the Japan National Conference on Geotechnical Engineering, Kyoto, Japan.

(50) Junhwan Lee, Garam Kim, Incheol Kim, Jiyeong Lee (2019). “Estimating the Compressive Load Capacity of Micropile Installed with Inclined Configuration”, 4th International Conference on Geotechnics for Sustainable Infrastructure Development, Hanoi, Vietnam.

(49) Garam Kim, Incheol Kim, Jiyeong Lee, and Junhwan Lee (2019). “Lateral displacement analysis for pile in clays using CPT-based p-y curve”, 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Taipei, Taiwan.

(48) Incheol Kim, Garam Kim, Seongcheol Hong, Jiyeong Lee, and Junhwan Lee (2018). “The coefficient of lateral earth pressure K0 subjected to freezing and thawing for granular soils”, International Symposium on Micro to Macro mathematical Modelling in Soil Mechanics, Reggio Calabria, Italy.

(47) Incheol Kim, Garam Kim, Jinoh Kim, and Junhwan Lee (2017). “Semi-analytical groundwater level model for engineering design”, 2018 Geotechnical Engineering Conference of Japan, Japanese Geotechnical Society.

(46) Seo, H., Jeong, I., Kim, I., Lee, J., and Kim, H. (2018). “Evaluation of stability change for shallow foundation under climate change”, 4th Int. Conf. on Computational Design in Engineering (CODE2018), Changwon, South Korea.

(45) Incheol Kim, Jinoh Kim, Nalae Kim, Garam Kim, Junhwan Lee (2017). “Analysis of influence factors on groundwater level and proposing prediction method”, 2017 Geotechnical Engineering Conference of Japan, Japanese Geotechnical Society.

(44) Incheol Kim, Donggyu Park, Doohyun Kyung, Garam Kim and Junhwan Lee (2017). "Estimating groundwater level based on observed precipitation data", 6th International Young Geotechnical Engineers’ Conference (6th iYGEC6), September, Seoul, Korea.

(43) Doohyun Kyung, Donggyu Park, Garam Kim, Incheol Kim and Junhwan Lee (2017). "Experimental investigation of connected foundation for transmission tower using reduced prototype field model tests in soft clayey soils", 19th International Conference on Soil Mechanics and Geotechnical Engineering (19th ICSMGE 2017), September, Seoul, Korea.

(42) Junhwan Lee, Garam Kim, Incheol Kim, Dongho Kim, and Byungkwon Byun (2016). “Effect of inter-particle strength on K0 correlation for granular materials”, Proceedings of 5th International Conference on Geotechnical and Geophysical Site Characterization (ISC’5), September, Gold Coast, Australia.

(41) Doohyun Kyung, Donggyu Park, Garam Kim, Incheol Kim, and Junhwan Lee (2016). “Improved performance of connected foundation for transmission tower using field model load tests in soft clayey soils”, International Symposium on Reliability Engineering and Risk Management, Aug., Seoul, Korea.

(40) Garam Kim, Jinoh Kim, Inchel Kim, Dongho Kim, Byungkwon Byun, Yanghoon Roh, Ohchang Kwon, and Junhwan Lee (2016). “Estimation of lateral displacement for offshore monopoles in clays based on CPT results” 2016 International Conference on Geomechanics and Engineering(ICGE16), ACEM16, Aug., Jeju, Korea.

(39) Gil-lim Yoon, Sun-bin Kim, Jin-Hak Yi, and Junhwan Lee (2015). “Reliability analysis fo laterally loaded pile for an offshore wind turbine support structure”, The 2015 World Congress on Advances in Civil, Environmental and Materials Research (ACEM15), Aug. Incheon, Korea.

(38) Junhwan Lee, Donggyu Park, Doohyun Kyung, Daesung Park, and Incheol Kim (2015). “Characterization of in-situ effective stress profiles in clays based on piezo-cone penetration test (CPTU) results”, Proceedings of 3rd International Symposium on Frontiers in Offshore Geotechnics, June, Oslo, Norway.

(37) Donggyu Park, Doohyun Kyung, Daesung Park, Incheol Kim, and Junhwan Lee (2015). “Analysis of load sharing behavior for piled rafts using normalized load response model”, Proceedings of 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (ISSMGE-15ARC), November, Fukuoka, Japan.

(36) Doohyun Kyung, Junhwan Lee, Garam Kim, Daesung Park, and Daehong Kim (2014). “Combined effects of embedded angle and pile spacing on load responses of micropiles in sands”, Proceedings of 12th International Workshop on Micropiles, Krakow, Poland, June.

(35) Susie Ha, Hoyoung Jeong, Junhwan Lee, Taesup Yun, and Hyungkwan Kim (2014). “Geotechnical adaptive technology to climate change: economic assessment of pervious block system”. Proceedings of 14th World Conference of Associate Research Centers for the Urban Underground Space, ACUUS 2104. Sep. 2014, Seoul, Korea.

(34) Junhwan Lee, Donggyu Park, Doohyun Kyung, and Dongyeol Lee (2013), “Effect of particle characteristics on K0 behavior for granular materials”, Proceedings of 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE), September, Paris, France.

(33) Donggyu Park and Junhwan Lee (2013). “Analysis of piled raft interaction in clay with centrifuge tests”, 1st Conference on Foundation and Soft Ground Engineering Challenges in Mekong Delta, June, Binh Duong, Vietnam.

(32) Donggyu Park, Doohyun Kyung, Kyujin Choi, and Junhwan Lee (2013). “Analysis of piled raft interaction in sand with centrifuge tests”, 7th International Conference on Case History in Geotechnical Engineering, May, Chicago, USA.

(31) Junhwan Lee and Dongyeol Lee (2013). “K0 behavior with freeze-thaw cycle by climate change in sandy soil”, 1st International Workshop of GIT4CC.

(30) Junhwan Lee, Donggyu Park and Doohyun Kyung (2012), “Application of Piezocone Dissipation Results for Characterizing Compressibility of Normally Consolidated Clays”, Proceedings of 4th International Conference on Site Characterization (ISC’4), September, Pernambuco, Brazil

(29) Junhwan Lee (2011), “Theme Lecture: Field tests for soil mechanics to foundation engineering”, 5th International Symposium on Deformation and Characteristics of Geomaterials (IS-Seoul 2011), 31 Aug. – Sep. 3. Seoul, Korea.

(28) Junhwan Lee, Doohyun Kyung, Choi, Kyujin, and Choi, Youngho (2011), “CPT-based estimation of the small-strain elastic modulus for clean and silty sands”, 5th International Symposium on Deformation and Characteristics of Geomaterials (IS-Seoul 2011), 31 Aug. – Sep. 3. Seoul, Korea.

(27) Junhwan Lee and Kyungbum Seo (2011), “Coupled correlation of long-term compressibility and PCPT dissipation for NC clays”, Proceedings of 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (14th ARC), 23 – 27 May, Hong Kong, China.

(26) Junhwan Lee and Doohyun Kyung (2011), “CPT-based estimation of ultimate load capacity for laterally loaded piles in sands”, Proceedings of 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (14th ARC), 23 – 27 May, Hong Kong, China.

(25) Junhwan Lee (2010), “A new CPT-based method for undrained shear strength estimation of clays”, Proceedings of 3rd Korea-Japan Geotechnical Engineering Workshop-Current Geotechnical Issues in Eastern Asia, Ansan, Korea, Sep. 10.

(24) Junhwan Lee, Doohyun Kyung, and Jungmoo Hong (2010), “Estimation of in-situ strength for sandy soils using CPT cone resistance”, Proc. of GeoShanghai 2010 International Conference, Shanghai, China, June.

(23) Junhwan Lee, Jongwan Eun, Monica Prezzi, and Rodrigo Salgado (2010), “Settlement estimation of multiple footings in sands”, 2nd International Symposium on Cone Penetration Testing, CPT’10, Huntington Beach, CA, USA, May, Vol. 3, Paper No. 3-01.

(22) Junhwan Lee, Kyungbum Seo, Beongjoon Kang, Sunghwan Cho, and Changdong Kim (2010), “Application of effective cone factor for strength characterization of saturated clays”, Proc. of GeoFlorida 2010 (Advances in analysis, modeling & design), West Palm Beach, USA, Feb 20 – 24, 1029-1036.

(21) Changwon Kwak, Kyungbum Seo, Junhwan Lee, and Injoon Park (2009), “Comparison of DEM and FDM for analysis of road embankment in karst region“, ISRM Regional Symposium, EUROCK 2009, Dubrovnik, Cavat, Croatia, Oct.

(20) Junhwan Lee, Changdong Kim, and Beongjoon Kang (2008). “CPT-based evaluation of in-situ shear strength for clays” International Symposium on Lowland Technology, ISLT2008, Busan, Sep.

(19) Junhwan Lee, Sungwook Hwang, and Doohyun Kyung (2008), “Effect of stress state on lateral load capacity in sands”, 2nd Kansai-Seoul Workshop at Seoul National Univ., Seoul, Korea

(18) Junhwan Lee, Jongwan Eun, Jihwan Kim, Younghwan Park, Minki Kim, and Sungwook Hwang (2008). “CPT-based bearing capacity of surface and surcharged footings in sands”, Proceedings of 3rd International Conference on Site Characterization (ISC’3), April, Taipei, Taiwan.

(17) Junhwan Lee, Jongwan Eun, Jihwan Kim, Younghwan Park, and Minki Kim (2007). “Effect of silt content for CPT-based estimation of the small-strain shear modulus”, Proceedings of 13th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (13th ARC), December, Kolkata, India.

(16) Junhwan Lee, Minki Kim, Younghwan Park, and Seunghwan Lee (2007) “Evaluation of reliability index and safety factors for pile load capacity estimation using CPT results”, 1st International Symposium on Geotechnical Safety and Risk. Oct. 18, 19.,

(15) Junhwan Lee and Sooil Kim (2007), “Analysis and evaluation of cone factor for undrained shear strength estimation of clays”, 1st Kansai-Seoul Workshop at Kyoto Univ., Kyoto, Japan

(14) Junhwan Lee and Rodrigo Salgado (2006), “Application of CPT cone resistance for footing bearing capacity estimation”, Proc. of GeoShanghai International Conference, Shanghai, China.

(13) Bumjoo Kim, Monica Prezzi, Rodrigo Salgado, and Junhwan (2005), “Mechanical properties of class F fly and bottom ash mixtures for embankment application”, Proc. of IGC 2005, Geotechnical Practices for Environmental Management, Disaster Mitigation and Foundation Engineering, Ahmedabad, India, Dec.

(12) Dipanjan Basu, Rodrigo Salgado, Monica Prezzi, Junhwan Lee, and Kyuho Paik (2005), “Recent Advances in the Design of Axially-Loaded Pile in Sandy Soils”, Proceedings of 2005 GeoFrontier, Austin, Texas, Jan, 1-13.

(11) Bumjoo Kim and Junhwan Lee (2004), “Mechnical Properties of Fly and Bottom Ash Mixture”, Proceedings of International Symposium on Lowland Technology 2004 (ISLT 2004).

(10) Kyuho Paik, Rodrigo Salgado, and Junhwan Lee (2004), “Design Lessons from Load Tests on Open- and Closed-ended Pipe Piles”, Proceedings of 5th International Conference on Case histories in Geotechnical Engineering, New York, April.

(9) Junhwan Lee, Rodrigo Salgado, and Kyuho Paik (2004). “CPT-based Load Capacity of Closed- and Open-ended Pipe Piles”, Proceedings of International Site Characterization, ICS’2, Porto, Portugal, Vol. 2, September, 1499-1505.

(8) Junhwan Lee, Rodrigo Salgado, Kyuho Paik, and Monica Prezzi (2003). “Instrumented Load tests on Closed- and Open-ended Piles”, Proceedings of 28th DFI Annual Conference on Deep Foundations, DFI, October, Miami, 233-242.

(7) Junhwan Lee, Sooil Kim, and Dongkyu Park (2003). “Analysis of Load-Settlement Response of Footings in Sand”, Proceedings of 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, August, Singapore.

(6) Junhwan Lee and Rodrigo Salgado (2002). “Mechanical properties of fly and bottom ash mixtures for embankment application”, Proceedings of the International Workshop on Light-Weight Geomaterials (IW-LGM2002), The Japanese Geotechnical Engineering, Tokyo, Japan, March.

(5) Sooil Kim, Kyungbum Seo, Jaewook Shim, and Junhwan Lee (2002). “Liquefaction Behavior of Saturated Sand Under Real Earthquake Loading”, KEERE-MCEER Joint Workshop on Contributions to Earthquake Eng., KEERE-MCEER, Vol. 1, July, pp. 25-34.

(4) Junhwan Lee and Rodrigo Salgado (2001). “Use of CPT results for pile base resistance in granular soils”, Proceedings of 15th International Conference on Soil Mechanics and Geotechnical Engineering, Istanbul, Turkey.

(3) Junhwan Lee and Rodrigo Salgado (2001). “Non-linear finite element analysis of calibration chmaber plate load tests for sands”, Proceedings of the 10th International Conference on Computer Methods and Advances in Geomechanics, Vol. 2., Tucson, Arizna, Balkema, Jan. pp 941 – 946.

(2) Junhwan Lee, Rodrigo Salgado, C. W. Lovell (2000). “Application of Shredded Tires as Lightweight Backfill”, Proceedings of International Symposium on Coastal Geotechnical Engineering in Practice, Yokohama, Japan, Sept., The Japanese Geotechnical Society, Balkema, Rotterdam, ISBN 90 5809 151 1, pp. 623 - 628.

(1) Junhwan Lee and Rodrigo Salgado (1999). “Pre-failure Loading Response of Foundations in Sands”, Proceedings of 2nd International Symposium on Pre-failure Deformation Characteristics of Geomaterials, Torino, Italy, Balkema, Sep., 667-674.